نامی صنعت

محصولات محصولات

استعلام قیمت
KFD0-DS-EX1.50, KFD0-DS-EX1.50,KFD0-DS-EX1.5,KFD0-DS-EX1.,KFD0-DS-E,KFD0-DS,KFD0-D,KFD0,KF,K, ,نامی صنعت,تجهیزات صنعتی برق صنعتی,namisanat,نامی صنعت,تجهیزات صنعتی,نمایندگی فروش سایر برند ها,نمایندگی فوش ایر برند های ABB,IFM,ind.power,برق صنعتی ind,power,برق, صنعتی ,• Output EEx ia IIC, ,Device installation permissible in, zone 2, , Polarity reversal protected, ,Accuracy 0.1 %, ,EMC acc. to NAMUR NE 21, 1-channel, KFD0-CS-Ex1.50P, The isolation of power loops for the, control of positioner, I/P converters, etc. A current source is connected to, the safe area terminals., • The isolation of a current signal from, fire detectors or similar sensors. In, this case, a voltage source can be, connected to the safe area, terminals. A specific measurement, current across a passive sensor can, be measured in the safe area with a, series resistor (min. 50 Ω)., When a voltage supply is used, the, measuring resistor canloop powered Power loss 0.2 W Inputs/Outputs (not intrinsically safe) Connection terminals 12-, 11+; 8-, 10-, 9+ Voltage 10 ... 35 V DC Safety maximum voltage Um 250 V eff Current 4 ... 20 mA Power loss at 40 mA and Uin < 26.1 V: < 700 mW per channel at 40 mA and Uin > 26.1 V: < 1.2 W per channel Inputs/Outputs (Intrinsically safe) Connection terminals 1+, 2-; 4+, 5- Output voltage for 10 V < Uin < 26.1 V: ≥ 0.9 x Uin - (0.4 x current in mA) - 0.7 for Uin > 26.1 V: ≥ 23 V - (0.4 x current in mA) Short-circuit current at Uin > 26.1 V : ≤ 65 mA Transfer current ≤ 40 mA also provide, current limitations,KFD0-DS-EX1.50, KFD0-DS-EX1.50,KFD0-DS-EX1.5,KFD0-DS-EX1.,KFD0-DS-E,KFD0-DS,KFD0-D,KFD0,KF,K, ,نامی صنعت,تجهیزات صنعتی برق صنعتی,namisanat,نامی صنعت,تجهیزات صنعتی,نمایندگی فروش سایر برند ها,نمایندگی فوش ایر برند های ABB,IFM,ind.power,برق صنعتی ind,power,برق, صنعتی ,• Output EEx ia IIC, ,Device installation permissible in, zone 2, , Polarity reversal protected, ,Accuracy 0.1 %, ,EMC acc. to NAMUR NE 21, 1-channel, KFD0-CS-Ex1.50P, The isolation of power loops for the, control of positioner, I/P converters, etc. A current source is connected to, the safe area terminals., • The isolation of a current signal from, fire detectors or similar sensors. In, this case, a voltage source can be, connected to the safe area, terminals. A specific measurement, current across a passive sensor can, be measured in the safe area with a, series resistor (min. 50 Ω)., When a voltage supply is used, the, measuring resistor canloop powered Power loss 0.2 W Inputs/Outputs (not intrinsically safe) Connection terminals 12-, 11+; 8-, 10-, 9+ Voltage 10 ... 35 V DC Safety maximum voltage Um 250 V eff Current 4 ... 20 mA Power loss at 40 mA and Uin < 26.1 V: < 700 mW per channel at 40 mA and Uin > 26.1 V: < 1.2 W per channel Inputs/Outputs (Intrinsically safe) Connection terminals 1+, 2-; 4+, 5- Output voltage for 10 V < Uin < 26.1 V: ≥ 0.9 x Uin - (0.4 x current in mA) - 0.7 for Uin > 26.1 V: ≥ 23 V - (0.4 x current in mA) Short-circuit current at Uin > 26.1 V : ≤ 65 mA Transfer current ≤ 40 mA also provide, current limitations,

KFD0-DS-EX1.50

Pepperl+Fuchs / Pepperl+Fuchs

گروه: برق صنعتی

زیرگروه: رله

زیرزیرگروه: سایر رله ها

برند: Pepperl+Fuchs

قیمت واحد: برای اطلاع از موجودی و قیمت تماس بگیرید.

توضیحات:

KFD0-DS-EX1.50

RELAY

DATASHEET

محصولات مشابه